• Finance/Trade accounts available
  • 4000+Products in Stock
  • UK Based-Next Day Delivery
  • Worldwide Delivery
  • Excellent Service

Cisco Wireless-G Access Point PoE WLAN access point 54 Mbit/s Power over Ethernet (PoE)

Cisco Wireless-G Access Point PoE WLAN access point 54 Mbit/s Power over Ethernet (PoE)
Wireless-G Access Point PoE



- Increases wireless throughput and range and reduces "dead spots" in the wireless coverage area with RangeBooster technology
- Connects to Power over Ethernet devices, simplifying installation and eliminating the need for and cost of installing external power supplies
- Protects network traffic to safeguard business information with enhanced security, including advanced encryption and security monitoring for additional visibility
- Provides consistent network performance with integrated quality of service to support voice and video applications
- Simplifies installation and configuration with easy-to-use web interface

RangeBooster technology is a compatible add-on to standard Wireless-G that can nearly double your wireless network's range and increase its throughput by up to 35 percent. Unlike ordinary wireless technologies that are confused by signal reflections, RangeBooster uses two smart receivers at each end to detect and decode reflected signals at distances where standard technologies give up. You'll find that "dead spots" in the wireless coverage area are reduced, too.

The advanced security features make this solution ideal for your business. Advanced wireless security using Wi-Fi Protected Access (WPA2) with up to 256-bit encryption, and Wireless Security Monitoring give your business the visibility and protection it needs. Used when Cisco® WUSB 200, WMP200 or WPC200 Wireless adapters are present, Wireless Security Monitoring alerts you of possible wireless intruders and vulnerabilities in the wireless deployment and gives you visibility into denial-of-service attacks.

The Cisco WAP200 Wireless-G Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes it easy to install - you can mount the access point anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you need to run only one cable to the access point to deliver both data and power. Of course, you can also use the included AC adapter if power is available nearby.
The integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.

Additional features like multiple basic service set identifiers (BSSIDs), wireless roaming, and auto-channel selection, make this solution ideal for your business.
Operational conditions
Operating relative humidity (H-H) 10 - 85%
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) 20 - 70 °C
Storage relative humidity (H-H) 5 - 90%
Weight & dimensions
Dimensions (WxDxH) 170 x 195 x 205 mm
Weight 400 g
Ports & interfaces
Ethernet LAN (RJ-45) ports 1
Cabling technology 10Base-T/100Base-TX
DC-in jack Y
Power over Ethernet (PoE) Y
Power consumption (typical) 3.48 W
Power requirements 12V 1A DC
Security algorithms WEP,WPA2-PSK
Management protocols SNMP 1, SNMP 3, SNMP 2c, HTTP, HTTPS
DHCP client Y
Other features
Supported data transfer rates 11/54 Mbps
Compliance industry standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af, 802.1p, 802.1q (VLAN), 802.1X, 802.11i, 802.11e, 802.11F
Connectivity LEDs Y
Antenna connector type SMA
Antenna gain level (max) 3 dBi
Internal N
LED indicators Y
Maximum data transfer rate 54 Mbit/s
Bandwidth 2.4 GHz
Spread spectrum method DSSS
Modulation DSSS,OFDM
Receiver sensitivity 11.g: 54Mbps@ -72dBm,
11.b: 11Mbps@ -85dBm
Channels quantity 13 channels
Quality of Service (QoS) support Y
Certification FCC, ICES-003, CE

Related Product