Cisco ASR 9001-S Ethernet LAN connection Router

ASR-9001-S
Cisco ASR 9001-S Ethernet LAN connection Router
4x 10GE(2 activated), 2 RU, 60 Gbps, IOS XR

Description

Details

Part of the Cisco ASR 9000 Series, the Cisco ASR 9001-S Router (Figure 1) is a compact, high-capacity provider edge router that delivers 60 Gbps of nonblocking, full-duplex fabric capacity in a two-rack-unit (2RU) form factor. The Cisco ASR 9001-S router can be upgraded to deliver 120 Gbps capacity by applying an upgrade license. Because it is based on the same Cisco IOS XR Software image as other routers in the Cisco ASR 9000 Series, the Cisco ASR 9001-S Router delivers the same features and services found on the Cisco ASR 9000 Series platforms, which allows service providers to standardize on the same Cisco IOS XR image. The Cisco ASR 9001-S Router has an Integrated route switch processor (RSP) and two modular bays that support 1, 10, and 40 Gigabit Ethernet modular port adapters (MPAs). The base chassis has four integrated 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) ports, a GPS input for stratum-1 clocking, Building Integrated Timing Supply (BITS) ports, and management ports. Two integrated 10 Gigabit Ethernet SFP+ ports and the Bay 0 slot is enabled by default in the Cisco ASR 9001-S. Another two integrated 10 Gigabit Ethernet SFP+ ports and the Bay 1 slot can be enabled by applying an upgrade license.

Cisco ASR 9000 Series Aggregation Services Routers deliver exceptional scale, service flexibility, and high availability to Carrier Ethernet transport networks. The routers are powered by Cisco IOS XR Software, an innovative self-healing, distributed operating system designed for highly dependable operation. This same operating system powers industry-leading routers such as the Cisco CRS Carrier Routing System, bringing the same reliability, scalability, performance, and comprehensive features that have made the Cisco CRS a leading choice for the service provider core. Cisco IOS XR Software also allows for an end-to-end IP and Multiprotocol Label Switching (MPLS) solution based on the same software, which helps reduce the complexity of managing multiple operating systems. With these features, the Cisco ASR 9000 Series further enhances the IP next-generation network (IP NGN) Carrier Ethernet design for converged, resilient, intelligent, and scalable transport of consumer, business, wholesale, and mobile services.

Cisco ASR 9000 Series Carrier Ethernet applications include business services, such as Layer 2 and Layer 3 VPN (L2VPN and L3VPN), IPTV, content delivery networks (CDNs), mobile backhaul transport networks, and broadband network gateway (BNG). Features supported include:
- Ethernet Services
- L2VPN
- IPv4, IPv6, and L3VPN
- Layer 2 and Layer 3 multicast
- IP over dense wavelength-division multiplexing (IPoDWDM)
- Synchronous Ethernet (SyncE)
- Ethernet operations, administration, and maintenance (EOAM) and MPLS OAM
- Layer 2 and Layer 3 access control lists (ACLs)
- Hierarchical quality of service (HQoS)
- MPLS traffic engineering fast reroute (MPLS TE-FRR)
- Multichassis link aggregation (MC-LAG)
- Integrated routing and bridging (IRB)
- Cisco Nonstop Forwarding (NSF) and nonstop routing (NSR)
Operational conditions
Operating temperature (T-T) 0 - 40 °C
Operating relative humidity (H-H) 10 - 85%
Storage temperature (T-T) -40 - 75 °C
Storage relative humidity (H-H) 5 - 95%
Power
Power consumption (typical) 375 W
AC input voltage 90-265 V
AC input frequency 50/60 Hz
Power source type AC, DC
Weight & dimensions
Weight 30.2 lbs (13.7 kg)
Depth ()
Height ()
Width ()
Ports & interfaces
USB ports quantity 1
Installed SFP modules quantity 4
Protocols
Supported network protocols IPv4, IPv6, L3VPN
Ethernet LAN features
Ethernet LAN data rates 1000,10000 Mbit/s
Ethernet LAN Yes
Management features
Quality of Service (QoS) support Yes
Design
Form factor 2U
Rack mounting Yes
LED indicators Yes
Colour of product Grey
On/off switch Yes

Related Product

Related product